Products

The XEM8320 is a USB 3.0 system integration platform with USB 3.0 support via the FrontPanel SDK, a AMD Artix UltraScale+ FPGA, and six SYZYGY ports.

The XEM7320 is a USB 3.0 system integration platform with USB 3.0 support via the FrontPanel SDK, a AMD Artix-7 FPGA, and three SYZYGY ports.

The SYZYGY Brain-1 is an open-source hardware SYZYGY Compatible carrier designed, manufactured, and sold by Opal Kelly.

The BRK8370 adds 4x SYZYGY Standard ports, 1x SYZYGY TXR4 Transceiver port, 4x QSFP+ ports, and a USB JTAG adapter to the XEM8370, powered by a Kintex Ultrascale+ FPGA, for more rapid prototyping and faster deployments.

Together with the XEM8350, this combo provides the AMD Kintex UltraScale FPGA with 4x SYZYGY Standard ports, 2x SYZYGY Transceiver ports, USB 3.0, ethernet, and more.

Together with the ECM1900, this combo provides the AMD Zynq UltraScale+ MPSoC with 4x SYZYGY Standard ports, 2x SYZYGY Transceiver ports, 2x QSFP+, and more.

Dual 40 MSPS 12-bit ADC based on the Analog Devices LTC2264-12.

Dual 125 MSPS 14-bit ADC based on the Analog Devices LTC2268-14.

Breakout module for SYZYGY Standard ports.

Breakout module for SYZYGY Transceiver (TXR2) ports.

Breakout module for SYZYGY Transceiver (TXR4) ports.

6-inch SYZYGY Standard cable (Samtec EQCD-020-06.00-TBL-STL-1-B).

6-inch SYZYGY Transceiver cable (Samtec HQDP-020-06.00-TBL-STL-5-B).

1/3-inch CMOS color digital image sensor with 3.4 Mpixel up to 60 fps and rolling-shutter or snap-shot modes. SYZYGY Standard peripheral.

125 MSPS, 12-bit dual DAC using the Analog Devices AD9116 on a SYZYGY Standard peripheral.

Pass-thru accessory for debugging and development of carriers and peripherals using SYZYGY Standard (STD) connections.

Pass-thru accessory for debugging and development of carriers and peripherals using SYZYGY Transceiver (TXR4) connections.

Dual DisplayPort 1.4 module featuring the Texas Instruments SN65DP141RLJ re-driver and Kinetic Technologies MCDP6000C1 re-timer devices on a SYZYGY Transceiver (TXR4) peripheral.

Provides two SFP+ sockets to a SYZYGY Transceiver port (TXR2) for use with high-performance serial standards over fiber optic or copper wire connections.

10/100/1000 ethernet PHY with RJ-45 on a SYZYGY Standard peripheral.

Triple CSI-2 MIPI interface board. SYZYGY Standard peripheral.

Hardware mounting kit for SYZYGY peripherals (screws, nuts, standoffs).

Analog instrumentation peripheral with 8 analog inputs, 8 analog outputs, and on-board signal conversion via a Texas Instruments ADS8688A 16-bit ADC and Texas Instruments DAC80508 16-bit DAC.

PCI Express 4-lane host adapter implemented as a SYZYGY Transceiver (TXR4) peripheral.

Breaks out a single SYZYGY Standard port to 4 Digilent™ Pmod connectors.

Provides one QSFP+ socket to a SYZYGY Transceiver port (TXR4) for use with high-performance serial standards over fiber optic or copper wire connections.

A multi-sensor peripheral with GPS, magnetometer, accelerometer, temperature, humidity, and ambient light sensors.

Loopback test module for SYZYGY Standard ports. This device is intended for use by carrier developers to test their units for production.

Loopback test module for SYZYGY Transceiver TXR2 ports. This device is intended for use by carrier developers to test their units for production.

Loopback test module for SYZYGY Transceiver TXR4 ports. This device is intended for use by carrier developers to test their units for production.