FMC IPMI EEPROM Generator

FMC IPMI EEPROM Generator

This form will help you construct an EEPROM image that can be used to setup an FMC module with an appropriate carrier. It is pre-populated with example values appropriate for our EVB1006 CMOS Image Sensor Evaluation Board.

Reference: ANSI/VITA 57.1 FPGA Mezzanine Card (FMC) Standard
Available for purchase at www.vita.com

Reference: IPMI Platform Management FRU Information Storage Definition v1.0
Available for download at www.intel.com/design/servers/ipmi/spec.htm


Target EEPROM Device

EEPROM Size

Board Info

Manufacturer Name
Product Name
Serial Number
Part Number
FRU File ID

Product Info

Not Specified If this is checked, the information below will not be included.
Manufacturer Name
Product Name
Part/Model Number
Version
Serial Number
Asset Tag
FRU File ID

FMC MultiRecords

Module P1 Connector P2 Connector
Vadj voltage
Vadj load limits (mA) Min (0..65535) Max (0..65535)
3.3v load limits (mA) Min (0..65535) Max (0..65535)
12v load limits (mA) Min (0..65535) Max (0..65535)
Clock Direction Defines direction of CLKx_BIDIR
Max TCK Rate
P1 Bank A Signals
P1 Bank B Signals
P2 Bank A Signals
P2 Bank B Signals
P1 Transceivers
P2 Transceivers

Library